The main reasons for the fall of the lifting tables

There are many reasons for the falling accident of the lifting tables, which can be summarized as follows:

1. The braking torque of the brake of the drive device is not enough, and the safety factor is too small.

2. The problem of single drive and double (multiple) drive of the lifting tables.

3. The reliability of the anti-fall safety device is poor.

4. Violating the deduction regulations, not in accordance with the provisions of the product manual, overload operation.

5. There is no leaning wheel on the back of the meshing place between the driving pinion and the rack, or there is no locking plate on the eccentric shaft of the leaning wheel.
6. No balance weight is set.
7. Other occasional reasons.