How to Safely Operate Small Hydraulic Aerial Lifting Platforms

Now the society is developing rapidly, the construction industry is prosperous, and more and more high-altitude operations are bothering us. In the past, the construction of high-rise buildings had to rely on scaffolding, and there was no guarantee of safety. The lifting platform is a device specially used for aerial work to assist us in completing the work. Today, the editor is going to tell us about the small hydraulic lift. How to operate it correctly to ensure the safety of personnel?
       1. Strictly abide by the operation safety and maintenance instructions on the equipment during operation, and learn to understand the safety issues surrounding the use of high-altitude lifting platforms;
       2. Prevent non-professional repair personnel from repairing without permission. This is explicitly prohibited. When installing, installing, repairing, and dismantling the lifting platform pump station and other components, the internal pressure value must be zero, and equipment is not allowed. any goods;
       3. When overhauling the hydraulic pump station of the equipment, cut off the power supply of the motor and all other electrical equipment in advance, and the connection and modification of all power supplies must be operated by professional technicians;
       4. When repairing or disassembling the hydraulic pump station driven by the right or wrong motor, we cut off all power sources in advance to ensure that the hydraulic station is always in a state of power failure;
       5. The hydraulic oil in the small hydraulic high-altitude lifting platform is likely to have an adverse effect on human health, and direct contact with the skin and eyes is prohibited to prevent personal safety from being threatened;
       6. It is forbidden to disassemble various valves, joints, accessories and other components on the pump station of the hydraulic lifting platform without authorization. The loosening of any component may cause the drop of the load and damage to the equipment;
       7. Considering that the replacement of hydraulic oil may cause pollution to the environment, it is necessary to use the recovery container and take corresponding leak prevention and oil absorption methods;